Skip to main content

CSA Score & Inspection History Lookup

See any carrier’s roadside inspections, driver and vehicle out-of-service rates against the national average, and the CSA (SMS) measures FMCSA makes public. Search by USDOT, MC number or company name. Free, no signup.

Try USDOT 53467 or MC-138328. Not affiliated with FMCSA.

What a CSA score is

CSA (Compliance, Safety, Accountability) is FMCSA’s program for finding carriers to investigate. Its Safety Measurement System (SMS) takes every roadside inspection and crash from the last 24 months, weights each violation by severity and by age (the last six months count three times, six to twelve months twice), and turns the result into a measure for seven BASICs: Unsafe Driving, Crash Indicator, Hours-of-Service Compliance, Vehicle Maintenance, Controlled Substances/Alcohol, Hazardous Materials Compliance and Driver Fitness. A lower measure is better.

FMCSA then compares carriers with a similar number of inspections and turns the measure into a percentile from 0 to 100. When a percentile passes the intervention threshold (65% for Unsafe Driving, Hours-of-Service and Crash, 80% for the other BASICs, and lower for passenger and hazmat carriers), the carrier gets an alert and may get a warning letter or an investigation. There is no single “CSA score”: a carrier has up to seven.

What the public can and cannot see

  • Public for every carrier: inspection counts, out-of-service counts and rates, each BASIC measure and the number of inspections with a violation, and every inspection with its violations.
  • Hidden for property carriers: percentiles and alerts. The FAST Act of 2015 took them off the public site, and the Crash Indicator and Hazmat BASICs are not in the public file at all. Carriers still see their own percentiles after logging in to the FMCSA Portal.
  • Public for passenger carriers: percentiles and alerts for bus companies remain public, and this lookup shows them.

How to read out-of-service rates

An out-of-service (OOS) violation is serious enough that the driver or truck may not move until it is fixed: bad brakes, a driver over hours, no valid CDL. The OOS rate is the share of inspections with at least one OOS violation. FMCSA’s SAFER snapshot shows national averages of 22.26% for vehicle inspections and 6.67% for driver inspections (as of Oct 30, 2026). We flag a rate above the average in amber and one more than 1.5 times the average in red, but only from five inspections up, because one bad stop moves a small sample a long way.

Inspection levels: what a Level 1 DOT inspection is

  • Level I, the full North American Standard inspection: driver documents, hours of service, and the vehicle from brakes and coupling to tires, lights and cargo securement, including underneath.
  • Level II, walk-around: the same driver checks and whatever the officer can see without getting under the truck.
  • Level III, driver only: license, medical card, hours of service, ELD and paperwork.
  • Level IV special one-off checks, Level V vehicle only without the driver, Level VI radioactive shipments, Level VII jurisdiction-mandated (school buses, limos) and Level VIII electronic, done wirelessly while the truck rolls.

A clean inspection (no violations) counts in the carrier’s favour: it adds to the number of inspections the measure is divided by.

How to challenge a violation in DataQs

If an inspection or violation is wrong, assigned to the wrong carrier or was dismissed in court, file a Request for Data Review in DataQs, FMCSA’s official system. It is free; the state that did the inspection decides.

  1. Find the inspection. Look up the carrier and note the inspection date, state and report details of the violation you think is wrong. The driver’s copy of the inspection report has the report number.
  2. Gather evidence. Collect what proves the record is wrong: the inspection report, ELD or logbook records, repair or annual-inspection receipts, a court dismissal or a lease agreement showing the truck ran under another carrier.
  3. File a Request for Data Review. Log in to DataQs (dataqs.fmcsa.dot.gov), choose the inspection or crash, pick the request type and explain in plain words what is wrong and what you attach. Filing is free.
  4. Follow up. The state agency that did the inspection reviews the request and answers in DataQs. If it corrects or removes the violation, SMS drops it at the next monthly update. If it denies the request, you can ask for reconsideration with new evidence.

FMCSA revised its DataQs requirements for states that receive MCSAP grants in April 2026: the officer who wrote the inspection may not decide the challenge, and states must answer within set deadlines.

Using inspections to vet a carrier

For brokers and shippers, the useful questions are simple: does the carrier get inspected at all for its fleet size, are its OOS rates near or below the national average, and do the latest inspections show the same problem again and again (brakes, hours, unqualified drivers)? Pair this with authority and insurance on the FMCSA carrier lookup and the carrier vetting checklist.

Frequently asked questions

›What is a CSA score?

CSA (Compliance, Safety, Accountability) is FMCSA’s safety program. Its Safety Measurement System (SMS) turns 24 months of roadside inspection violations into a measure for each of seven BASICs, such as Unsafe Driving or Vehicle Maintenance. A higher measure is worse. FMCSA then ranks carriers with similar exposure into percentiles from 0 to 100; a percentile over the intervention threshold is an “alert”.

›Can I see a property carrier’s CSA percentiles?

No. Since the FAST Act of December 2015, FMCSA may not show the percentiles and alerts of property carriers to the public. It still publishes the measures, inspection counts and out-of-service rates, which this lookup shows. Passenger carriers (bus companies) are the exception: their percentiles and alerts are public and shown here.

›How do I check my own CSA scores?

Log in to the FMCSA Portal with your company’s login and open SMS: carriers see their own percentiles there, including the property-carrier percentiles hidden from the public. This free lookup shows what brokers, shippers and insurers can see about you.

›What is a good out-of-service rate?

Compare it with the national averages FMCSA shows on SAFER: about 22% of vehicle inspections and about 7% of driver inspections end with an out-of-service order. A rate well above those, on a meaningful number of inspections, is a warning sign; a carrier with only two or three inspections can swing a long way on one bad stop.

›What is a Level 1 DOT inspection?

A Level I North American Standard inspection is the full one: the officer checks the driver’s license, medical card, hours-of-service records and drug-and-alcohol items, and the vehicle’s brakes, lights, tires, coupling, cargo securement and more, including underneath the truck. Level II is a walk-around without going under the vehicle, and Level III checks the driver and paperwork only.

›How do I challenge a wrong inspection or violation?

File a Request for Data Review (RDR) in DataQs, FMCSA’s official system at dataqs.fmcsa.dot.gov. The state that did the inspection reviews it. Attach evidence such as the inspection report, repair receipts, court dismissal or ELD records. Filing is free and you do not need a service to do it.

›How current is this data?

Inspections come from FMCSA’s daily vehicle inspection file, usually a few days behind the roadside stop. SMS measures and out-of-service totals come from FMCSA’s monthly SMS snapshot. Each block on the result shows the date of its data.