Skip to main content

Freight class calculator

Density and estimated LTL class for one pallet or a whole shipment, in inches/pounds or centimeters/kilograms.

Freight class from density: divide total weight in pounds by total volume in cubic feet (length × width × height in inches ÷ 1,728, pallet included). Under the 13-tier scale Estes and XPO publish, less than 1 lb/ft³ is class 400, 10 to under 12 is class 92.5, 15 to under 22.5 is class 70 and 50 or more is class 50. This is the density class only: carriers re-weigh and re-measure, and where an item has handling, stowability or liability concerns its NMFC item class can differ.

The class shown is an estimate from density alone: confirm it with your carrier before you tender, and check whether your item has its own NMFC class. Scale read November 18, 2026 from the Estes and XPO density tables (NMFTA does not publish the ranges outside its licensed ClassIT+). Not affiliated with NMFTA or any carrier; no NMFC item numbers or item descriptions are used here.

Calculator

One line per size of pallet or piece: quantity, length, width, height (in, pallet included) and the total weight of that line (lb).

Enter pieces, dimensions and weight; the class updates as you type. Needs JavaScript; nothing you enter leaves your browser.

Freight class density chart

13-tier density scale as published by Estes (chart “NMFC, as updated in July 2025”) and in the XPO tariff effective August 17, 2026; read November 18, 2026.
TierPounds per cubic footClass
1Less than 1400
21 but less than 2300
32 but less than 4250
44 but less than 6175
56 but less than 8125
68 but less than 10100
710 but less than 1292.5
812 but less than 1585
915 but less than 22.570
1022.5 but less than 3065
1130 but less than 3560
1235 but less than 5055
1350 or greater50

Each tier includes its lower figure: exactly 10.0 lb/ft³ is class 92.5 and exactly 50 is class 50. XPO’s tariff table lists the same 13 tiers; the NMFTA page we found for density does not publish the ranges (they sit in its ClassIT+ product), so the dates come from the carriers.

How to calculate freight class from density

  1. Measure each handling unit at its widest points in inches, with the pallet, crate or skid included.
  2. Cubic feet per unit = length × width × height ÷ 1,728. Multiply by the number of identical units and add the lines.
  3. Density = total weight in pounds ÷ total cubic feet. For metric input, this page converts 1 in = 2.54 cm and 1 kg = 2.20462 lb first.
  4. Find the density in the table above to read the class.

Example: two pallets, each 48 × 40 × 60 in, 800 lb together. Volume = 2 × 115,200 ÷ 1,728 = 133.33 ft³, density = 800 ÷ 133.33 = 6.0 lb/ft³, which is the bottom of the “6 but less than 8” tier: class 125.

Reclass risk: why the carrier’s class can differ

  • Estes says it “may also reweigh and dimension your freight to verify density once we’ve picked up your shipment”. A freight that sits just above a tier line is the one a re-measure will move.
  • Density is the default, not the rule. Estes says class rests on density, handling, stowability and liability, and density is used “in the absence of handling, stowability, and liability information”, so an item with its own NMFC class can land elsewhere.
  • TForce’s tariff states its conversion table presumes no unusual stowability, handling or liability characteristics, and its Table 645 has different breaks below 22.5 lb/ft³ for density-based agreements.
  • Carriers can charge a correction fee when an inspection corrects the bill of lading (XPO’s tariff lists a $50.70 fee where linehaul rises by $1.00 or more).

The calculator warns when your density is within 5% of the tier’s lower line. Before you tender, check the carrier you are shipping with, and for freight you broker, confirm the carrier’s identity and authority with the FMCSA carrier lookup and the carrier vetting checklist.

Freight density calculator

The density figure above is the same number a “freight density calculator” returns: total pounds divided by total cubic feet. It is shown with the class so you can compare it to a carrier’s quoted density.

Sources (read November 18, 2026)

Frequently asked questions

›How do you calculate freight class?

Weigh the shipment, measure each handling unit (pallet included) in inches, multiply length × width × height and divide by 1,728 to get cubic feet, add the units up, then divide total pounds by total cubic feet to get density. Look that density up in the 13-tier table above. Carriers such as Estes and XPO state that density is used to assign class when handling, stowability and liability information is absent.

›What is the freight class for 10 pounds per cubic foot?

Class 92.5. The table’s tier is “10 but less than 12” lb/ft³, so exactly 10.0 is class 92.5 and 9.99 is class 100.

›Did freight class density change in 2025?

Estes labels its density chart “NMFC, as updated in July 2025” and shows 13 tiers, with class 55 (35 to under 50 lb/ft³) and class 50 (50 or more) at the dense end. Broker write-ups date NMFTA Docket 2025-1 to July 19, 2025; we did not read NMFTA’s own bulletin, which sits behind its standards pages.

›Can my freight class change after pickup?

Yes. Estes says it “may also reweigh and dimension your freight to verify density once we’ve picked up your shipment”, and XPO’s tariff lets the carrier assign class from the total shipment density. A corrected bill of lading usually brings a correction fee, so measure the pallet as it ships, including overhang and the pallet itself.

›Does this tool give NMFC item numbers?

No. NMFC item numbers and descriptions are published by NMFTA in its licensed ClassIT+ database. This page only converts density to the class that carriers publish in their own density tables; for an item’s NMFC number ask your carrier or NMFTA.

›Why does TForce show different breaks?

TForce Freight’s tariff UPGF 102-T Table 645 keeps finer breaks below 22.5 lb/ft³ (for example 9 to under 10.5 is class 100 and 13.5 to under 15 is class 77) for customers on written density-based agreements. The scale on this page is the 13-tier chart Estes and XPO publish; use the carrier’s own table when it is the one in your contract.

›Do I include the pallet in the dimensions?

Yes. XPO’s tariff says that where articles are unitized with a pallet, platform, rack or skid, it “constitutes the shipping package or a part thereof and shall be included in the computation of density.”